TA-264 firmware updata

NOTICE:

1.Please unzip the firmware and copy to the memory sticker.
  (Please check your version with \"INFO\" button in DVR) 

2.please insert the memory sticker into the USB port of the TA264 DVR,
   then enter the setup amin menu of the DVR to set the 
   ADVANCE SETUP/ UPDATE FIRMWARE.

3.After the updating, the system will reboot automatically. 
   Note:
  (1).The process of updating and rebooting will spend 1~2 minutes 
  (2).While the process is running, please don¡¦t turn off the power or the DVR 
       can¡¦t  boot.  If the DVR can¡¦t boot, please send the DVR to the original 
	   factory for repairing. 
  (3).The firmware must be updated while the DVR stops recording.